Wednesday, January 5, 2011

Energy Conservation Pool Tips

Heating & Heat Loss

Reduce heat loss by using a pool cover. According to the U.S. Department of Energy, savings of 50% - 70% are possible.

Fencing, hedges, landscaping, and cabanas that shelter your pool from prevailing winds will further reduce heat loss.

If your pool heater is more than five years old, chances are a new high efficiency gas heater could quickly pay for itself in utility bill savings.

A pool heat pump can save up to 80% in energy usage compared to a gas heater. Check with your pool professional to see if a heat pump is appropriate for your region.

If you use your pool only on weekends, reduce your heater or heat pump thermostats settings by eight to ten degrees during the week.

When leaving for vacation for more than a week, turn off the pool heater or heat pump, including the pilot light. Please use caution in freezing conditions.

According to the National Swimming Pool Institute and the American Red Cross, the most healthful swimming temperature is 78 degrees. Reducing your heater or heat pump thermostat to maintain a 78 degree or lower temperature will also help conserve energy.

Install a timer or a control system to automate the hours of operation.

When reopening your pool, make sure your heater or heat pump is working properly.

Circulation

Replace your pool pump with a more energy-efficient model.

New variable speed pumps with permanent magnet motors and digital controls can save as much as 90% in utility costs compared to one- or two-speed pumps with induction motors.

If using an energy-efficient one- or two-speed pump, make sure your pump is sized to your pool’s requirements.

Reduce run time or speed to reduce energy use.

If using a one-speed pump, reduce filtration run time. In general, water needs to be circulated through the filter once every 24 hours.

If using a two-speed or variable speed pump, use the lowest speed to appropriately circulate the water. Reducing speed saves more energy than reducing run time.

Run your pool's filtration system during off-peak hours when electricity demand is lower, generally between 8 p.m. and 10 a.m. Install a timer or a control system to automate the hours of operation.

Keep intake grates clear of debris. Clogged drains require the pump to work harder.

To obtain maximum filtration and energy efficiency, backwash or clean your filter regularly, as required.



Submitted By: Frank Bowman Designs - Raleigh Swimming Pool Company


Frank Bowman Designs is a progressive custom swimming pool & outdoor living design / build company. We specialize in unique and unusual projects consisting of custom concrete swimming pools, spas, landscaping, natural stone patios, outdoor kitchens & fireplaces, pool houses, cabanas and more. Feel free to contact or follow us for more information about our products and services.




2 comments:

  1. Great Blog!! That was amazing. Your thought processing is wonderful. The way you tell the thing is awesome. You are really a master.

    Swimming Pool Supplies Burlington MA

    ReplyDelete
  2. I am trusting the same best exertion from you later on also. Truth be told your experimental writing abilities has propelled me. lanai screen

    ReplyDelete